Shandong Shunyuan Mining Machinery Equipment Co., Ltd.

[Technical parameters] Manual and electric pipe bending machine
This product uses a manual pipe bending machine when electricity is not available or inconvenient to use, and an electric pipe bending machine when electricity is available.
Model

Pressure

Stroke

Bend angle

Bend range
< br/> Wall thickness










< br/>



















[Note] Manual and electric bend Pipe machine
Before use, first check whether the oil in the oil tank is full. If it is insufficient, fill it up.
Be sure to loosen the bolt on the oil filler port before use to facilitate ventilation.
The switch before the bend must be turned off, otherwise the pressure will not be activated.
Before use, press the handle to make the large plunger pump work, fully extend the piston rod, lift the cylinder head and other components, so that the pipe bender is in a tilted state, and then loosen the switch counterclockwise to allow air to flow from the tank Drain all the air. If you find that the air has not been drained out, repeat it several times.
The outer diameter of the bent pipe must fit into the groove of the bending mold, otherwise the bent pipe will be dented or the bending mold will burst.
The contact area between the bent pipe and the two support wheels must be smooth and lubricated. The weld seam of the welded pipe should not be directly outside or inside the bend.
Do not bend beyond the specifications specified in the technical parameters to avoid overpressure and damage to the machine body.
It must be filtered when refueling. The oil in the pipe bending machine that has not been used for a long time must be replaced regularly. The machine body must be cleaned and maintained regularly. Add kerosene to the fuel tank and turn off the switch. Press the handle to extend the piston rod, and then loosen it. switch to retract the piston rod. In this way, the oil circuit of the body or cylinder head is smooth.
Unscrew and clean the filter, and be careful not to install it incorrectly when disassembling.
After the pipe bending machine stops working, tighten the bolts on the oil filler port.
In an instant, winter has arrived, and the long-awaited Double Eleven has passed. You are looking forward to whether your goods are the same as the real ones and what the quality is. I hope you can buy good quality goods at the lowest price. At the same time, please believe that our quality and physical products are in sync. Shunyuan is here, every Double Eleven, the quality and service will satisfy you.
The manufacturer promises that all products purchased from our store will be replaced with a seven-day guarantee and a one-year warranty. Please feel free to buy.
Trademark brand Shunyuan
Contact person Ms. Ji
Service phone number
Landline and fax
Factory address Huangzhuang Industrial Park, High-tech Zone, Jining City, Shandong Province